Braces are a method of beauty and safe orthodontic support. It appeared many years ago and is still popular and applied by many people. During the orthodontic process, to make the arch wire secure, the doctor can insert braces screws to help stabilize it. Who should get minivis braces? Let’s find out the information right in the following article provided by the dentist My Auris.
What is Minivis braces?
Minivis braces are one of the most popular orthodontic appliances. It is designed like a screw, made from Titanium. Minivis are quite small in size with an average diameter of 1.4 to 2mm and an average length of about 6 to 12mm. Minivis is a safe and benign device for the human body.
Specifically, during the procedure, the doctor will insert the Minivis directly into the jawbone, to create a fixed anchor point, helping the remaining teeth move to the desired position on the jaw. However, not all cases require Minivis, but only some special cases. The doctor will recommend screw insertion to better support the braces process, thereby bringing better results with shortened braces time.
When should Minivis be inserted in braces?
In cases where it is necessary to insert braces screws, after about 3 to 6 months of braces, the doctor will prescribe the procedure. People with metal braces often have to have brace screws inserted. The screw insertion location will be at tooth number 6 or tooth number 5.
In addition, in some special cases the screw can be inserted at another location such as the front teeth. Depending on the condition and level of tooth correction needed, the doctor will choose the appropriate screw placement location.
Normally, the number of screws needed for the patient to be inserted on each side of the jaw is 2 to 4 and inserted evenly on both sides. However, depending on each patient’s case, the number of screws that need to be inserted must be adjusted accordingly.
Who needs to use Minivis when getting braces? id=”Ham_lech”>Misaligned jaw
In case of uneven teeth causing the patient’s bite to be misaligned, this device will be used as a fixed anchor to help other teeth be pulled back into the correct position, relatively adjusting the jaw deviation.
Hard jaw bone
Hard jaw bone will help the teeth to be able to be aligned and moved Helps increase traction, increasing the ability to move teeth.
Horse teeth
For people with buck teeth, braces with metal brackets will help overcome this defect. However, in complicated cases such as teeth growing too crooked or too misaligned with the jaw, Minivis implants will help fix the traction and straighten the teeth.
Loss of tooth number 6
For people who have lost tooth number 6, it is necessary to have Minivis inserted during braces. Because tooth number 6 is an important anchor point during the braces process. In this case, Minivis will replace tooth number 6 to support and help the remaining teeth move.
Gummy smile
A gummy smile makes you look unattractive. One of the solutions to overcome this situation is orthodontic braces. The doctor will prescribe Minivis to be inserted into the jawbone to pull the teeth, subside the teeth and correct the bite. From there, bring the smile line to the desired position. want.
Actually, depending on each person’s condition, the time to insert Minivis varies. However, to achieve the highest efficiency in the orthodontic process, screw insertion ranges from 12 to 24 months, after which the patient needs to insert screws. will be removed by the doctor.
Therefore, to ensure the safety and quality of the braces process, you need to have an examination and have the doctor evaluate your condition.actually. At that time, the doctor will review, advise and give the exact answer for your condition.
On the other hand, the operation of inserting Minivis is similar to implantation, but is simpler because the brace screw is small and easy to insert into the jaw bone. Before performing the procedure, the doctor will inject or apply anesthesia to help reduce pain. Therefore, you will not feel pain or discomfort during the procedure.
After the procedure is completed and when the anesthetic has worn off, at first you may feel a slight toothache, but it will quickly subside over time.
Process for inserting Minivis in braces teeth
Just like with braces, following the correct procedure will bring high efficiency and help limit pain and other complications. Below is the process of inserting Minivis when orthodontic:
- First of all, to examine the jaw bone structure, the doctor needs to order the patient to have an X-ray. Then, anesthetize the mucosa and inject anesthetic.
- The doctor uses specialized tools to support the process of screwing the screw into the jawbone, holding the screw to the jawbone in the form of mechanical anchorage and biological stability. Therefore the process is relatively simple.
- The screw insertion time will take from 5 to 10 minutes, without causing pain. Because during the procedure you will be injected with anesthesia. In case the jaw bone is hard, inserting the screw will feel a bit painful, the jaw bone is soft and spongy and the pain will be less.
After the anesthetic wears off, you will feel a little uncomfortable during the first session or day. However, it will gradually decrease in the following days.
Notes after inserting Minivis
After inserting Minivis braces teeth, you need to pay attention to oral health care to minimize pain. At the same time, it helps speed up the braces process and limits dental complicationsdangerous mouth. Specifically, you need to pay attention to the following issues:
- Cold compress: This therapy will help reduce pain and inflammation effectively. If done continuously, apply for 15 minutes then rest for 15 minutes to achieve the best results.
- Take medication as prescribed by the doctor: After inserting the Minivis, the doctor will prescribe appropriate pain relievers and anti-inflammatory drugs according to each person’s condition. This helps in the best recovery and supports the braces process more effectively. However, you need to take the medicine according to the correct dosage and instructions from your doctor. Absolutely do not arbitrarily change medicine or buy medicine from outside for use.
- Eat more scientifically: Nutrition also has a significant impact on the orthodontic process. You should eat soft foods such as porridge, soup, milk, oatmeal, etc. At the same time, you should not eat foods that are too hot, too cold, too sour or too hard, etc. to avoid affecting the ability to heal.
It can be seen that Minivis braces are a useful tool to support the orthodontic process. Hope this article brings you a lot of useful information. At the same time, it helps you better understand this type of orthodontic support device. If you intend to get braces, go to reputable dental facilities for detailed advice and support. You can refer to My Auris, with a team of professional doctors and modern equipment. We will always have the direction to help you get braces safely and effectively.
Yen Nhi
